0 items

OXXN 8" PTO Wood Chipper Hydraulic Power Feed

SKU# OX-8100

Currently SOLD OUT

Original Price: $2,899.00

In Stock: $2,499.00

Quick Overview

Introducing OXXN Upgrades: The OXXN OX-8100 now standard with Made in USA Blades installed.Upgrades include new, streamlined hydraulic line design minimizing excess hose and featuring JIC/SAE standard fittings.  Assembly time has been reduced tremendously with our newly designed 2 Piece hopper system.  A convenient mounting plate makes assembly of our wider, longer hopper an easy one person task.  Our exclusive ski plate base is now height adjustable to accomodate larger tractors as well as uneven ground. Finally, OXXN PTO Wood Chippers now showcase a unique ventilation system, ensuring powerful clog-free discharge of chips.  Speak with one of our OXXN Team Members Today 1-855-438-6996  

Click on image to zoom

Details

Introducing OXXN Upgrades: The OXXN OX-8100 now standard with Made in USA Blades installed. Upgrades include new, streamlined hydraulic line design minimizing excess hose and featuring JIC/SAE standard fittings.  Assembly time has been reduced tremendously with our newly designed 2 Piece hopper system.  A convenient mounting plate makes assembly of our wider, longer hopper an easy one person task.  Our exclusive ski plate base is now height adjustable to accomodate larger tractors as well as uneven ground. Finally, OXXN PTO Wood Chippers now showcase a unique ventilation system, ensuring powerful clog-free discharge of chips.  Speak with one of our OXXN Team Members Today 1-855-438-6996  

Click on the tabs below for detailed specifications:

  • Features
  • Specs
  • Warranty
  • Video


Recognized for their exclusive features and superior performance, OXXN Wood Chippers boast a 200lb. solid steel flywheel, an extra wide 28" hopper opening, 3-way safety bar and direct drive power feed.

PTO Powered The OXXN Chipper is powered by your tractor's PTO. Minimum horsepower requirements are 25HP at the engine. Be sure to check your tractor specifications to ensure the rear lift capacity is greater than 1000lbs. For tractors with less than 25HP, please call to speak with one of our OXXN Team Members 1-855-GET-OXXN.
Oversized 28" Hopper Opening Exclusive to OXXN Chippers, a 28" hopper opening means less trimming and more chipping. This feed opening will accommodate material with side branches and even full trees.
Ski Plate Base Exclusive to OXXN Chippers, ski plates replace the traditional leg base, allowing for more stable operation regardless of what type of surface you set the chipper on.
3 Way Safety Stop OXXN 8100 Chippers feature a wraparound safety stop bar that is easily accessible from the front or either side of the chipper. This wraparound bar also allows the user to control the direction of the powered feed rollers (forward and reverse).
8" x 8" Infeed Opening OXXN 8100 Chippers feature a true 8" x 8" infeed opening which can handle large material (6"-7") without the need for trimming side branches.
Powered Double Infeed Rollers OXXN 8100 Chippers feature powered double infeed rollers - a powered, spring tension loaded top roller bites into material, while the powered smooth bottom roller provides the added power needed to create an extremely efficient powered feed system.
Hydraulic Powered Feed System OXXN 8100 Chippers feature a hydraulic powered feed system that runs off its own self-contained hydraulic tank and pump. You DO NOT need to use your tractor's hydraulics. Let the chipper do the work - your tractor's PTO supplies all of the power you need.
Variable Speed/Direction OXXN 8100 Chippers allow the user to manipulate the speed and direction of the hydraulic powered feed rollers. For large material, slowing down the feed rollers will allow the machine to chip more efficiently. If material gets caught-up in the hopper, simply reverse the feed rollers to back the material out and the run the material right back through without ever having to stop the machine.
JIC/SAE Standard Hydraulic Fittings OXXN 8100 Chippers use JIC/SAE standard hydraulic fittings which are easily replaced domestically if needed. Just one more example of the design considerations made to ensure future replacement parts are available to our customers.
Hardened Steel Chisel Bar Infeed Roller OXXN 8100 Chippers feature high carbon steel chisel bar constructed infeed rollers that can bite into just about anything from softwood to hardwood, pine, vines and leaves, fresh or dry material - OXXN Chippers can handle it.
Adjustable Roller Tension Heavy duty springs combined with our simple adjustment mechanism allows you to vary the down pressure based on the type of material being chipped.
Massive 200 LB. Solid Steel Flywheel This solid steel flywheel does the job, creating the inertia necessary to chip even the hardest material.
Recessed Single Edge Flywheel Knives Single edge flywheel knives are recessed in the flywheel, resulting in a stronger design critical to the performance and durability of your machine.
Quick X-Change Flywheel Access Panels for Blades Access panels located on the chipper's flywheel housing allow for easy access for changing blades.
Strong Support 2" Main Shaft This 2" main shaft is supported by 3 industrial strength cast steel bearings. 1 pillow block bearing supports the 2" main shaft, which runs right through the flywheel housing where its strength comes from the support of 2 flange bearings.
Industrial Strength Cast Steel Bearings Industrial strength cast steel bearings with zerk fittings for easy greasing are manufactured to withstand the high tensile stress and dynamic load of your chipper.
Greasable Zerk Fittings on Bearings Well maintained greasable bearings will extend the life of bearings by a significant margin and will contribute to the overall performance of your chipper.
Heavy Duty Cogged Belts The OXXN Chipper is equipped with a 4 V-Belt drive system utilizing standard size 17mm heavy duty cogged belts to prevent slippage.
Flywheel Chamber Ventilation To prevent blockage, the OXXN Chipper features flywheel chamber ventilation holes. This ventilation system acts as a vacuum, effectively clearing chips from the chamber and directing them out the discharge chute.
3/8" Steel Flywheel Housing Heavy gauge 3/8" steel used to on the flywheel housing provides the strength necessary to support the industrial strength cast steel flange bearings.
360° Swivel Chute The flexibility of a 360° swivel discharge chute with adjustable top deflector allows you to determine where the chips land.
Powder Coat Finish Powder coating protects your chipper against the elements and prevents rusting. It provides a more durable finish than liquid paints can offer, while still providing an attractive finish.
Serviced and Inspected Before Delivery Our OXXN team follows an inspection checklist to ensure your chipper has been properly serviced prior to shipment. Your chipper arrives packaged in a steel crate with minimal assembly required.
Comprehensive Operation Manual The OXXN Chipper comes with a comprehensive operation manual that will walk you through assembly step by step with easy to understand directions and full color pictures to ensure accuracy. Typical assembly takes 2.5 hours.
3 Year Warranty OXXN supplies a 3 year non-transferrable warranty to customers covering just about everything but normal wear and tear parts like blades, belts and hydraulic hoses.
OXXN™ Advantage At OXXN we want you to feel confident about your purchase and our dedicated team is here to help you every step of the way. If you have any questions, just call us - we're here for you!

 

Model OX-8100
Capacity 8"
HP Minimum (Engine/PTO) (25/19)
RPM 540
Mounting System 3 Point Hitch
Flywheel Material Solid Steel
Flywheel Diameter 24"
Flywheel Weight 200 Lbs.
Feed System Power Self Contained Hydraulic Tank and Pump
Number of Knives 2 Flywheel + 1 Bed Blade
Knife Type High Carbon Hardened Steel
Hopper Opening Oversized at 28"
Discharge Chute Rotation 360°
Discharge Chute Hood Height 72"
PTO Shaft Included and Shear Bolt Protected
Overall Weight 990 lbs.

OXXN™ Inc. Warranty

OXXN Inc. warrants to the original purchaser that this OXXN product will be free from defects in material and workmanship for three (3) years beginning on the date of purchase by the end user according to the following schedule when used as intended and under normal service and conditions for personal use.

This Warranty is limited to the replacement of any defective part by OXXN Inc. and does not cover common wear items such as blades, belts, hydraulic lines, etc. OXXN Inc. reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.

This Warranty does not apply to any part or product which in OXXN Inc. judgment shall have been misused or damaged by accident or lack of normal maintenance or care, or which has been repaired or altered in a way which adversely affects its performance or reliability, or which has been used for a purpose for which the product is not designed. Misuse also specifically includes failure to properly maintain oil levels, grease points, and driveline shafts.

Claims under this Warranty must be made to OXXN Inc.. OXXN Inc. reserves the right to make changes in materials or design of the product at any time without notice.
This Warranty shall not be interpreted to render OXXN Inc. liable for damages of any kind, direct, consequential, or contingent to property. Furthermore, OXXN Inc. shall not be liable for damages resulting from any cause beyond its reasonable control. This Warranty does not extend to loss of crops, any expense or loss for labor, supplies, rental machinery or for any other reason.

No other warranty of any kind whatsoever, express or implied, is made with respect to this sale; and all implied warranties of merchantability and fitness for a particular purpose which exceed the obligations set forth in this written warranty are hereby disclaimed and excluded from this sale.

Additional Information
Model OX-8100
In Depth test
Dimensions N/A
Activation Information N/A

Product Tags

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.